The TPW4052-SR analog switch is an advanced solution for analog and digital multiplexer/demultiplexer applications. This dual SP4T switch, designed to replace the MC14052BDR2G, brings superior performance and versatility to your projects. Built with an enhanced process, the TPW4052-SR analog switch provides lower power dissipation and high switching speeds, making it an ideal choice for a wide range of applications.
Technical Overview
The TPW4052-SR analog switch is equipped with three digital select inputs (S0, S1), eight independent inputs/outputs (An, Bn), two common input/output (A, B), and a digital enable input (/E). When /E is set to HIGH, the switches are turned off, ensuring a reliable control mechanism. This design allows the TPW4052-SR analog switch to function effectively as both a multiplexer and a demultiplexer, with an input range that extends to the supply limits.
A key feature of this device is its break-before-make switching action. This mechanism prevents momentary shorting when switching between channels, enhancing the reliability and safety of the system. The TPW4052-SR's performance is further highlighted by its low ON-state resistance and fast switching times, making it a robust solution for various applications.
Features
Analog Switch Voltage
The TPW4052-SR analog switch operates at multiple voltage levels, including 3.3V, 5V, 10V, and ±5V. This flexibility in operating voltage makes it suitable for a broad spectrum of applications, from low-power battery-operated devices to higher voltage industrial control systems.
Low ON-State Resistance
One of the standout features of the TPW4052-SR is its low ON-state resistance. At Vs = ±4.5V or 9V, the typical ON-state resistance is 50Ω, while at Vs = 4.5V, it is approximately 60Ω. Even at a lower voltage of Vs = 3V, the resistance remains relatively low at around 300Ω. This low resistance ensures minimal signal loss and higher efficiency in signal transmission.
High Bandwidth
The device boasts a bandwidth of 200 MHz, making it suitable for high-frequency applications. This high bandwidth capability allows the TPW4052-SR to handle a wide range of signals with minimal distortion, ensuring clear and accurate signal processing.
Fast Switching Times
Speed is a crucial factor in many electronic applications, and the TPW4052-SR delivers with fast switching times. The typical turn-on time (tON) is 60ns, and the turn-off time (tOFF) is 50ns. These rapid switching capabilities make the TPW4052-SR suitable for time-sensitive applications where quick response times are essential.
Break-Before-Make Switching
The break-before-make switching action of the TPW4052-SR ensures that one channel is fully disengaged before another channel is engaged. This feature is vital in preventing short circuits and maintaining the integrity of the signals being switched.
Wide Operation Temperature Range
The TPW4052-SR analog switch operates effectively over a broad temperature range from –40°C to 125°C. This wide operating temperature range ensures that the device can perform reliably in various environmental conditions, from industrial settings to outdoor applications.
Applications
The versatility and performance of the TPW4052-SR make it suitable for a wide range of applications:
Industry Control Systems
In industrial control systems, reliable and fast switching is crucial. The TPW4052-SR’s low power dissipation and high switching speeds make it an excellent choice for managing signals in these systems, ensuring efficient and accurate control.
Battery-Powered Systems
For battery-powered systems, power efficiency is paramount. The TPW4052-SR’s low power dissipation helps extend battery life while maintaining high performance, making it ideal for portable and remote applications.
Audio Signal Routing
In audio applications, signal integrity and low distortion are critical. The TPW4052-SR’s low ON-state resistance and high bandwidth ensure that audio signals are transmitted with minimal loss and high fidelity, making it suitable for audio signal routing and switching.
Instrumentation
Precision and reliability are essential in instrumentation applications. The TPW4052-SR’s fast switching times and wide operating temperature range ensure accurate and dependable performance in various measurement and testing instruments. We have two models below in stock:
Conclusion
The TPW4052-SR is a high-performance dual SP4T analog switch that offers a versatile solution for a wide range of applications. With its low ON-state resistance, high bandwidth, fast switching times, and reliable break-before-make switching action, it provides exceptional performance and efficiency. Whether used in industrial control systems, battery-powered devices, audio signal routing, or instrumentation, the TPW4052-SR delivers reliable and robust performance. Consider integrating the TPW4052-SR analog switch into your next project to take advantage of its advanced features and capabilities.
Any question or inquiry, pls feel free to contact us: [email protected]
For more LCDs and ICs, pls visit: www.andesource.com